![](_gb_images/_gb_sitenav_spacer.gif) |
![](_gb_images/_gb_clear.gif) |
Alternative OS
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Mac Elite
Join Date: Dec 2002
Location: Bay Area of San Jose
Status:
Offline
|
|
Is there any other type of OS I can install on my performa 578?
Thx In Advance.
System Specs
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Professional Poster
Join Date: Jun 2000
Status:
Offline
|
|
You can run a Linux port if you like. The compatibility page says your machine is supported.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Mac Elite
Join Date: Dec 2002
Location: Bay Area of San Jose
Status:
Offline
|
|
Originally posted by bradoesch:
You can run a Linux port if you like. The compatibility page says your machine is supported.
Neat O!
Now I just have to figure out how to slap this on my performa ....
![Hmm...](http://forums.macnn.com/images/smilies/hmmm.gif)
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Professional Poster
Join Date: Jun 2000
Status:
Offline
|
|
I just saw this when skiming the FAQ:
5. What about the 680LC40's?
This little chip can be quite a problem for the uninformed. If you have one of these chips, you may have a defective one that does not support any kind of FPU (floating-point) emulation. According to Motorola's official errata, any chip with a mask revision less than 2E71M has the bug. Specifically, revision 2E23G, used in the LC 475, has been confirmed to be buggy. Running Linux on one of these machines is possible, but probably not worth it. You'll need to recompile all of your binaries not to use floating point (gcc's -m-soft-float option works nicely) and you'll need to hack your kernel to cause it not to try to save FPU register states while task-swapping. All in all, a hellish task and probably not worth it. At one point, it was possible to get a replacement from Apple and/or Motorola, but that was quite a long time ago, and given Apple's present state of complete disassociation from the 68k Macs, your best bet would be simply to upgrade to a real 68040. Sorry.
Note: Although not tested it is believed that those chips cannot be used in multiuser machines that have even the slightest fear of hacking. It makes a very easy method for your machines to be crashed solid and there is no workaround.
You might want to check this out before you start downloading and trying to install. It's pretty easy to slide the motherboard out of these Macs (at least it is with my Performa 580CD.)
It also sounds like you'll have trouble running the BSDs (FreeBSD, NetBSD, OpenBSD) before of the 68LC040 processor. Good luck with Linux if you attempt it.
Brad
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Registered User
Join Date: Mar 2000
Location: Garden of Paradise Motel, Suite 3D
Status:
Offline
|
|
Originally posted by bradoesch:
I just saw this when skiming the FAQ:
You might want to check this out before you start downloading and trying to install. It's pretty easy to slide the motherboard out of these Macs (at least it is with my Performa 580CD.)
It also sounds like you'll have trouble running the BSDs (FreeBSD, NetBSD, OpenBSD) before of the 68LC040 processor. Good luck with Linux if you attempt it.
Brad
IF you have the LC chip, you should look around the web to see if you can buy the 68040 replacement for it. I can't remember whether the 578 had a soldered chip or not. If it IS soldered, you should be able to swap the motherboard for a few bucks.
I love the old all-in-ones. Good luck with it.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
|
|
|
![](_gb_images/_img_misc/_gb_mb_previousthread-off.gif)
|
|
![](_gb_images/_gb_clear.gif) |
Forum Rules
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_sitenav_spacer.gif) |