![](_gb_images/_gb_sitenav_spacer.gif) |
![](_gb_images/_gb_clear.gif) |
Yes I’m Overthinking This But…
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
I want to put up the wind speed gauge that came with the LaCrosse weather station my wife got me. It’s not something that’ll be connected to the whole world, so following standards for instrument location isn’t a big deal.
I want to put this up on an inexpensive antenna mast (2 lengths of RCA’s 4.5 foot mast) in the back yard. But my (overthinking it) question is how to anchor/mount the thing. Having just passed a newly built commercial building with its old fashioned mailbox concreted into a 4X4 in a 5-gallon bucket, I wonder if that would be stable enough for a roughly 9 foot long mast.
A single 80-pound bag of concrete will close to fill a standard 5-gallon bucket, and the mast sections themselves weighs about 1.5 pounds each. The instrument can’t weigh a whole pound…
Opinions, experience, en/discouragement?
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Jun 2000
Location: California
Status:
Offline
|
|
Is there a reason you're using a 5-gal bucket, instead of just digging a posthole? No matter how much weight you add, a bucket can roll around with enough wind.
I'd dig a posthole, add a 4x4 post (pressure-treated if possible) with some cement to keep it fixed. Then use conduit clamps to secure your pole. If you need a longer pole, just change the above-ground details. If you get tired of the wind speed gauge, your post can always become a place to tie up your horses.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Moderator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_moderator.png)
Join Date: Aug 2001
Location: Nobletucky
Status:
Online
|
|
I agree with Reader. A posthole is the way to go here. Secure that thing into the ground.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
Leaning and rolling were exactly the issues I was wondering about when I thought of asking this question. However, I should have included this Important Point: my yard is over enough limestone and caliche that a post hole is not an option, so whatever I do, it has to be on the surface of the yard.
I’d wondered if this simple option would be sufficient, but your feedback has validated my own concerns. A bucket approach is off the list
I’ve considered a setup of square pavers and hollow concrete blocks to do the same sort of thing, but give it a broad base to minimize potential tipping. I think I could do this sort of thing with a single bag of concrete mix, as long as I manage to get the pavers and blocks stuck together. I know concrete isn’t great at adhering things together, but “Liquid Nails” does…
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Jun 2000
Location: California
Status:
Offline
|
|
Try a beach umbrella base. If it's not big enough to be stable, add a couple sandbags. Neater than cinderblocks. Or fasten your pole to something that's already present, like a shed.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
Umbrella base… I like that. And I can find such things locally.
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Moderator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_moderator.png)
Join Date: Jun 2000
Location: inside 128, north of 90
Status:
Online
|
|
you could fill cement into a square rectangle that is less likely to tip? rubbermaid tote etc. but that would be very heavy to move. So bricks/umbrella stand sound good.
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
Administrator ![](http://forums.macnn.com/_gb_images/_img_ranks/star_5_admin.png)
Join Date: Apr 2001
Location: San Antonio TX USA
Status:
Offline
|
|
I’ve spent quite a bit of time examining options, and just about anything that would employ concrete and/or blocks would be both too heavy for me to manage without a lot of help (and/or time), and overkill.
So I’m looking at patio umbrella bases. This idea only requires leveling the base, which should be doable considering that the back yard is already pretty level.
|
Glenn -----OTR/L, MOT, Tx
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_clear.gif) |
|
|
|
![](_gb_images/_img_misc/_gb_mb_previousthread-off.gif)
|
|
![](_gb_images/_gb_clear.gif) |
Forum Rules
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is Off
|
|
|
|
|
|
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
![](_gb_images/_gb_clear.gif) |
|
![](_gb_images/_gb_sitenav_spacer.gif) |